Loading...

FURNACE FUEL OIL

FURNACE FUEL OIL

FURNACE FUEL OIL

Furnace fuel (also known as industrial heating oil) has been specifically developed as commercial heating oil to replace gas oil (red diesel) in commercial boilers. Its clean-burning characteristics make it an excellent choice for your commercial heating needs. Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue.

Main Applications:

Fuel for power generation
Marine bunkers
Large industrial

CST 180-FURNACE OIL

Constituents Unit Specifications
Density at 15 ºC
kg/m3
0.99 max.
Kinematic Viscosity at 50 ºC
cSt
180 max.
Flash point (PMCC)
ºC
66 min.
Calculated Carbon Aromaticity Index (CCAI)
-
850 max
Pour Point
ºC
18 max.
Sulphur
% Mass
3.5
Vanadium
mg/kg
350 max.
Carbon residue
% wt
15 max.
Total sediment aged
% Mass
0.10
Gross Calorific Value
Kcal/kg
10100 min.
Ash
% wt
0.1 max.
Water
% vol
1
Sodium
mg/kg
50 max.
Asphaitene Content
%wt
14 max.
Aluminium
mg/kg
30 max.
Aluminium plus silicon
mg/kg
80 max.
Acidic, inorganic mg KOH/gm
Nil
Nil

FURNACE OIL, SPECIAL GRADE

Constituents Specifications Typical Test Method
Density @ 15°C g/ml
0.9600 Max
0.9600
IS 1448 P: 16
Flash Point (PMC),°C
66 Min.
75
IS 1448 P: 21
Pour Point °C
+27 Max.
3
IS 1448 P: 10
Viscosity, Kinematic 50°C, cSt
165 Max.
160
IS 1448 P: 25
Calorific Value, Gross Cal/g
Report
10350
IS 1448 P:6
Micro / Conradson Carbon
16.5 Max
15.5
ASTM D 4530
Ash (% by Mass.)
0.1 Max
0.04
IS P: 4
Water content (% by Mass).
1 Max.
<0.05
IS 1448 P: 40
Sulphur, Total (% by Mass)
2.8 Max.
2.70
IS 1448 P: 33/35
Sediment (% by Mass)
0.25 Max.
0.04
IS 1448 P: 30
Asphaitene Content, %wt
7.0 Max.
5.0
IP 143
Acidic, inorganic mg KOH/gm
Nil
Nil
IS 1448 P:2

CST 380 - FURNACE OIL

Constituents Specifications Typical Test Method
Density @ 15°C g/ml
0.9600 Max
0.9800
ASTM D 1298
Flash Point (PMC),°C
66 Min.
70
ASTM D 93 /IP 34
Pour Point °C
+18 Max.
-9
ASTM D 97 / IP 15
Micro / Conradson Carbon
18 -20
18 -20
ASTM D 4530/ D 189
Ash (% by Mass.)
0.15 Max
0.04
ASTM D 482 / IP 4
Water content (% by Mass).
1 Max.
<0.05
ASTM D 95 / IP74
Sulphur, Total (% by Mass)
3.5 Max
3.20
ASTM D 4294
Sediment (% by Mass)
0.25 Max.
0.04
ASTM D 473 /IP 53
Vanadium( ppm)
250
170
UOP 391 /91
Sodium, ppm)
50
20
UOP 391 /91
Viscosity, Kinematic 50°C, cSt
380 Max.
370
ASTM D 445 /IP 71
Potential Sediment (% by ageing)
0.15
0.05
IP 390

Packaging

Drum
Bulk